Rods, Tubes & Machined Components in PEEK, PCTFE & PTFE upto 2100 mm or 82 inches
Rods, Tubes & Machined components of PTFE, PCTFE & PEEK upto 3000 mm Outer Diameter with FDA & NORSOK M710 certification.
ETCHED PRODUCTS FOR TANK-LINING AND CHEMICAL APPLICATIONS
PTFE Sheets and Tapes are widely used for tank and vessels protection and offer superior benefits in terms of durability, chemical protection, anti-corrosion barriers, thus ensuring functionality, reliability and long-lasting performance.
Key properties
Excellent resistance to continuous service temperatures starting from -100°C (212°F) up to 200°C (392°F) and, for limited periods, even to higher temperatures; the low temperature resistance of the product enables satisfactory performance at temperatures as low as –190°C (-310°F)
PTFE possesses an high inertness towards nearly all known chemicals. Only alkali metals, chlorine trifluoride and elemental fluorine at high temperature and pressures can affect PTFE properties
PTFE is insoluble in all solvents up to temperatures as high as 300°C (572°F). Certain highly fluorinated oils swell and dissolve PTFE only at temperatures close to the crystalline melting point.
Our strength
Skills to match the narrowest requirements of purity and reduced contamination consistently along the entire tape length (e.g. pin-holes absence, excluding contamination larger than 0,1 mm2, no scratch, no cracks)
Strict tolerances on width and thicknesses
Full product quality certifications.
Flexible and easy to bond.
Etching process with sodium-ammonia makes PTFE sheets and tape bondable to themselves or to metals. The etching process extract fluorine atoms at the surface creating a carbonaceous layer which can be bonded with the appropriate adhesives.
metric sizes
| Thickness (mm) | Tolerance (2) | Standard Sizes (mm)(1) | |
|---|---|---|---|
| Skived sheets | from 1,00 to 5,00 | Thickness: +10% - 0.0% Width / Length: +3,0% - 0,0% | 600×600 |
| 1200x1200 | |||
| 1500x1500 | |||
| Skived films | from 1,00 to 5,00 | Thickness: +10% - 0.0% Width / Length: +3,0% - 0,0% | Rolls |
| 600 | |||
| 900 | |||
| 1200 | |||
| 1500 |
imperial sizes
| Thickness (inch) | Tolerance (3) | Standard Sizes (inch)(1) | |
|---|---|---|---|
| Skived sheets | from .031” to .187” | Thickness: +10% - 0.0% Width / Length: +3,0% - 0,0% | 24”x24” |
| 36”x36” | |||
| 48”x48” | |||
| 60”x60” | |||
| Skived films | from .031” to .187” | Thickness: +10% - 0.0% Width / Length: +3,0% - 0,0% | Rolls |
| 24” | |||
| 36” | |||
| 48” | |||
| 60” |
Additionally:Etching treatment
Application: Seals, flanges for tank lining; gaskets, piping components
Materials: fluteck™ P 1500, fluteck™ P 1550, fluteck™ P 8001 CF
Additional sizes availble on request
Metric sizes: according to ISO 13000 standard and to corporate standard specification
Imperial sizes: According to ASTM D3294 standard and internal to corporate specification